Light Beige (PX0500)
PX0500Solid artificial marble slab PX0500 in light beige made from natural stone, marble powder, and resin. Eco-friendly, cost-effective, easy to maintain and clean, suitable for interior decoration including wall
Engineered marble
With uniform veining, stability, and lower defect rates, engineered marble has become a practical choice for large decorative surfaces in hotels, commercial centers, and villas. Based on the stone system of Pengxiang Group and dual production line capacity in Vietnam and China, Duc Thinh translates the aesthetic language of natural stone into a mass-producible, flexibly customizable engineered material.
Why Choose This Product Line?
Marble Beauty
Elegant marble veining maintains consistency and seamless rhythm over large tiled areas.
Easy to fabricate
Flexible cutting and joining with high efficiency, much lower construction waste than natural stone blocks.
Superior Value
At the same aesthetic level, budget and supply are more controllable, and price is better than natural marble.
Multiple Surface Finishes
Polished / honed / sandblasted surfaces, from luxurious gloss to matte subtlety, choose as desired.
Uniform and Stable
Uniform veining and low defect rate, no color variation and hidden cracks of natural stone.
Technical Specifications
| Material | Natural stone, marble powder, resin |
| Slab size | 3200×1600mm, 2400×1600mm, custom sizes available |
| Thickness | 18-30mm |
| Surface finish | Polished, honed, sandblasted, custom |
| Application | Interior decoration (walls, floors, bathrooms, living rooms, countertops) |
| Origin | Fujian, China |
| Production time | Approximately 15 days (negotiable) |
🏭Production Process
- ▸Duc Thinh Stone — supplier and processor of engineered marble under Pengxiang Group, mainly serving Vietnam's interior decoration and export market
- ▸Natural stone and synthetic marble powder with resin binder and vacuum vibration pressing, featuring uniform veining and lower defect rate than natural stone blocks
- ▸After shaping, the slabs are fired, then polished, honed, or sandblasted as required to reveal marble appearance with various textures
- ▸Large-size slabs 3200×1600 / 2400×1600mm, thickness 18–30mm, supports custom cutting and edge processing
- ▸Factory in Nghe An, Vietnam and capacity in Fujian, China operate in coordination to stabilize supply, with typical production cycle of about 15 days
🏆Quality Certifications
- ✓ISO 9001 — quality management system
- ✓Control of non-radioactive raw materials (referencing NSF / Class A standard per batch)
- ✓Periodic physical testing of water absorption, flexural strength, abrasion resistance and many other indicators
- ✓Environmentally friendly materials: low-VOC resin adhesive meeting green interior finishing requirements
- ✓Export quality control: check color matching, flatness and defects of each slab
🔧Installation Guide
- 1.Measure the project and draw slab layout plan before installation to plan vein matching direction and cutting waste
- 2.For walls, prefer dry hanging system or dedicated adhesive system to ensure uniform load bearing and low hollow rate
- 3.For floors, control substrate flatness and leave necessary expansion joints to prevent blistering due to thermal expansion
- 4.Fill joints with matching color professional adhesive for flat seams and seamless visual flow
- 5.After installation, clean the panels, treat joints and overall polishing, check flatness and grain matching of each panel
🧽Care & Cleaning
Wipe with a soft cloth using warm water or neutral cleaner to keep the surface dry, clean and glossy.
Avoid prolonged contact with high-concentration acids or alkalis on the surface; periodic basic maintenance for walls and floors helps maintain gloss.
Clean up beverages, grease and the like promptly; treat stubborn stains with a mild cleaning solution and soft pad, then rinse with water.
Avoid scratching with hard objects and strong impacts on corners; protect slab surfaces and edges during transport and installation.
📦Packaging & Shipping
| Packaging | A-frame steel rack + corner protection + shrink wrap; export orders add nailed wooden crates for reinforcement |
| Slab size | 3200×1600 / 2400×1600 mm + cut-to-size |
| Thickness | 18 – 30 mm |
| Minimum order quantity | Per container, support color/size mixing |
| Storage note | Store upright on A-frame racks; avoid stacking flat and impact to corners |
Reference Projects Using This Product Line
Frequently Asked Questions
▸How to choose between engineered and natural marble?
▸Can it be used for flooring?
▸What surface finishes are available?
▸Can it be cut to size?
▸What is the minimum order quantity and delivery time?
Other SKUs in this series· Engineered marble
View full catalog →
Need a DDP Quote for Light Beige (PX0500) to Vietnam?
Huayue's sourcing team in Guangzhou will contact you to confirm stock and quote full container 20ft / 40ft HQ or LCL, and send a full quote within 24 hours (including tax + shipping + installation if needed).